News

Sensormetrix Introduce I/O Device for IP CCTV Integration

Date: 31 Aug 2010

Sensormetrix is pleased to introduce you to the new Juno range from HW Group, Juno is set to revolutionise the IP CCTV industry. This is an I/O device for CCTV integration which allows you to connect digital inputs and relay output to your IP video management system. CCTV software sees Juno as an IP camera but without video stream. Utilising the inputs and outputs Juno allows you to connect your CCTV management system to fire systems, entrance gates, power systems, access control systems and many more.

HW Group has teamed up with PSIA, Genetec and Omnicast to offer simple integration. In most cases no extra drivers are required so there is no extra cost for software integration. HWg-Juno is a simple hardware solution for plug & play I/O integration. Low cost and No hassle.

Once you’re all up and running outputs are controlled for the IP CCTV software and those outputs can control 110V/230V power. The Juno range offers 4 different products to suit different requirements.

JUNO 101 JUNO 404 JUNO 1200 JUNO 008
1 DI for Dry contact 4 DI for Dry contact 12 DI for Dry contacts Table cell 2
1 DO Relay (50V) 4 DO Relay (50V) None DO Table cell 2
WEB server WEB server WEB server WEB server
Ethernet 100 Mb Ethernet 100 Mb Ethernet 100 Mb Ethernet 100 Mb
PoE (IEEE 802.3af) or 5V wall plug power adaptor 5V wall plug power adaptor PoE (IEEE 802.3af) or 12V wall plug power adaptor PoE (IEEE 802.3af) or 12V wall plug power adaptor
Wall mount Wall mount Wall or rack mount kit Wall or rack mount kit

More Information...

Siretta Release Family of High Gain Antennas for Enhanced M2M Connectivity

Date: 29 Jul 2010

Siretta Antennas – the Berkshire, U.K based M2M antenna specialist today announced the release of its Oscar 12 high gain antenna for GSM / GPRS connectivity.

Designed for office or base station installations – the Oscar 12 is the first in a line of Oscar class antennas offering double digit gain RF performance.

Offering a 10dBi, omni-directional performance across 900 & 1800MHz GSM and GPRS networks, Oscar 12 is a bracket mounted antenna featuring a radiating section of multiple dipoles arranged as a colinear and housed in a reinforced, UV protected 810 x 22mm enclosure.

The base comprises of a TNC female connector which can be connected with a mating cable assembly offering a flexible approach to individual installation requirements. Its ridged mounting bracket offers secure fixing to buildings, allowing a 200mm stand off between wall and antenna.

Vertically polarised and with a maximum power rating of 25 Watts, the Oscar 12 is ideal for improving transmission and reception in fringe coverage areas where omni directional performance is still required.

David Taylor, Business Manager of Siretta adds "Oscar 12 is the first release in our high gain Oscar series targeted for industrial GSM/GPRS, 3G and 2.4GHz applications. Built for customers who need to ensure good Quality of Service levels – we have already received exceptional feedback from beta customers and expect this trend to continue as greater performance is expected from telemetry equipment".

For further information, please contact Siretta on +44 118 976 9014

Sequoia Technology Spearheads Novel Communications System for Mozambique Early Infant Diagnosis program

Date: 23 Jul 2010

Sequoia Technology spearheads novel communications system to greatly improve the quality of Mozambique’s Early Infant Diagnosis program – the Expedited Results System (ERS)

From 2007 to 2009, Mozambique saw a rapid expansion of the National Early Infant Diagnosis programme for diagnosis of HIV/AIDS in newborn children to include over 235 health centers across the country. However, transportation of samples and results between remote districts and two central laboratories often takes many weeks. To accelerate the return of results, Sequoia Technology devised an innovative system, in conjunction with The Clinton Foundation, to allow laboratories to send and print test results directly in any health centre with GPRS network coverage. Called the Expedited Results System (ERS) it utilizes Sequoia designed system software, GPRS enabled printers and the local GSM network to vastly reduce the time and cost of transporting results from the laboratory to clinics accurately and reliably. ERS is managed centrally by an administrative assistant, reducing the workload of skilled laboratory technicians. Features of the Sequoia designed system are confidentiality and the delivery of results being guaranteed through automated monitoring and evaluation software over the African GSM network along with unique GPRS enable printers.

All health centres in Mozambique have now been fitted with Sequoia GPRS printers and the software and servers are based in Reading in the UK. The complete system has now been proved for a number of months now with 100% of all data messages being received correctly right across Mozambique. This system has now helped more than 20,000 infants since its inception in Mozambique. Sequoia is now poised to help all other African countries with this system via the Clinton Foundation

Background to introduction of the ERS system
In Mozambique, limited sample referral logistics, insufficient laboratory capacity and minimal numbers of skilled health care workers led to undesirably long turn around times for critical Early Infant Diagnosis (EID) results, significantly delaying treatment initiation, and ultimately contributing to child mortality. The ERS system was specifically designed to connect all the new health centres within Mozambique to the central laboratories to significantly speed up the early diagnosis of infants to HIV/AIDs specifically and other diseases.

More Information...

New Range of GPRS and 3G Wireless Terminals, SQ864 GPRS and SQ864-3G

Date: 12 Jul 2010

Sequoia Technology is pleased to announce the launch of a range of GPRS and 3G wireless terminals, SQ864 GPRS and SQ864-3G. Taking advantage of the latest in GPRS and 3G technology, Sequoia have produced a low cost, high performance terminal that is perfect for many M2M applications.

The SQ864 GPRS and 3G is an industrial terminal solution perfect for the wireless M2M market. Both the GPRS and 3G devices offer a high level of functionality in a compact plug and play housing with a host of interfaces that allow you to easily integrate into your system. Together with its small size and advanced set of features it integrates perfectly into a wide range of M2M applications such as remote monitoring and control, meter reading, telemetry, logistics, diagnostics, remote access, vending and security.

SQ864-GPRS & 3G allows you to communicate to your equipment with CSD and GPRS data services provided by the network providers. The SQ864 GPRS and 3G use Quad-Band GPRS class 10 technology that operates around the globe and with extended temperature range can be used in harsh environments. The SQ864-3G uses a high performance 3G module that runs on the 2100 UMTS band that operates across Europe and several networks across the globe providing connection speed up to 7Mbps.

The integrated TCP/IP stack greatly simplifies network services such as connecting to the internet, sending emails, connecting to a FTP server and opening data socket connections through simple and easy to use AT Commands. With the broad supply voltage range (5-15v DC) the SQ864 family can be used in a wide range of embedded and real world solutions.

Sequoia's SQ864-3G can be provided with Windows, Linux and WinCE CDC serial USB drivers that significantly ease the integration in existing applications as well as standard RS232 serial.

Sequoia have produced a family of products that are perfect for the challenging M2M market, for further information please contact Tim Clayton at Sequoia technology on 01189 769031.

Sensormetrix is Official Distributor for T&D Corporation

Date: 9 Jul 2010

Sensormetrix is very pleased to announce we’ll be adding T&D products to our portfolio of environmental and remote monitoring solutions. With the technical expertise and value for money that Sensormetrix always offer, combined with the innovative and robust products that T&D are renowned for manufacturing, we believe this will be a successful alliance.

T&D are hugely successful in Japan with around a 90% market share in the environmental datalogger sector, success we hope to emulate here in the UK. T&D products are not just high quality and robust but also designed to be aesthetically pleasing. Models are available in both tidy wall mounted versions and very compact, handy portable solutions. All of which are designed for many uses but specialising in Goods/Livestock Transportation, Food Preparation and NHS applications. These products are capable of monitoring; Temperature, Humidity, Voltage, Barometric Pressure, Luminance and UV.

Sensormetrix are looking forward to offering the full range from our website, (www.sensormetrix.co.uk) below are a few of our recommended products.

Wireless RTR-5 Series

Wireless RTR-5 Series The RTR-5 series are a family of ruggedized dataloggers, with IP64 or IP67 options they can be used in the harshest of environments. These devices are ideal for data recording during transportation, warehouse storage and all stages of processing, cooling and freezing of foods, also great for many NHS applications. These self-contained, battery operated wireless devices can offer the only practical way to collect data from locations that are in motion or are physically inaccessible.





RTR-61

RTR-61 The RTR-61 is a handheld thermometer and temperature datalogger which is designed to measure the internal temperature of food items and liquids using a penetration type probe. Just the single press of a button allows the user to record the temperature, time, date, operator and item ID's and a pre-programmed measurement judgment. The RTR-61 has a measurement range of -25 to +235°C and is suitable for both hot and cold readings. Current readings, judgment results and even operator instructions sent from the supervisor are displayed on an easy to read, backlit LCD display. The RTR-61 can store up to 1,800 data readings before downloading to a PC. The penetration probes are available in two different lengths and can be attached either directly to the unit or to a handle with a 3 foot cord.



TR-7W

The TR-7W datalogger provides outstanding functionality in a compact and cost effective package. Totally unique in today's marketplace, these ultra-reliable loggers interface directly to a local area network, through either standard Ethernet or 802.11b (Wi-Fi). This capability allows for direct viewing or downloading of data from anywhere on the network, or via the internet. The TR-7W can even send warnings directly to 5 e-mail addresses.

We look forward to answering any questions you may have on the T&D product range.

For more information view the products or visit the Online-Forum

The Launch of the Sensormetrix Web Forum

Date: 6 Jul 2010

The remote monitoring portal Sensormetrix has launched a forum, customers are able to post any questions on environmental or remote monitoring solutions that they many require. They also regularly update the forum with articles about remote monitoring products and new technologies in this field as it becomes available. Plus it includes details on the latest government legislation regarding environmental monitoring.

Although the Sensormetrix site is designed to allow the user to easily navigate its pages and find the information or products relevant to them. Which is achieved by splitting the site into a number of applications:-

However Sensormetrix customers often have very bespoke requirements, so the forum has been launched to allow customers to post their requirements and technical questions. The Sensormetrix team are very speedy at posting innovate solutions from their large product range.

Sensormetrix aims to develop the forum to be an active social networking site for anyone who wants to know about environmental monitoring solutions, the forum is full of useful information and product links. They have people asking many types of questions, for example:- how to warn of a flood in a server room, technical details on USB dataloggers, designing a system to monitor temperature and humidity of horseboxes during transport and even a person who wishes to monitor the temperature of a swimming pool in his holiday home. All of these are answered promptly and direct the customer to the best solution within the Sensormetrix site.

Sensormetrix hope users will experience an enhanced customer service, and relate with other users in their questions as our technical service team receive very similar requests, as time goes on this post will be included in Google and other search engines which will help serve others with similar remote monitoring requirements.

Please come and see the forum for yourself and join the community.

Sequoia Announces the Release of the HWg-WLD Water Leak Detector

Date: 1 Jul 2010

Sequoia Announces the Release of the HWg-WLD Water Leak DetectorAfter much success with similar IP based temperature and humidity devices we’re pleased to offer a new IP based water leak detector to our portfolio.

The HWg-WLD is able to detect water or other conductive liquid and then raise an alarm before the leak/flood becomes a costly problem. The device features a built-in Web server with SNMP support and e-mail alerts, plus can control remote relay outputs over IP (switch remote relay ON/OFF if water leak is detected).

We believe there are many uses for this type of device for example:-

Typical applications can involve monitoring of coolant piping in air conditioning systems or water detection around technical areas. The water leak sensing cable is extremely versatile and can be wrapped around the piping, suspended under the piping, or laid on the bottom of a pipe duct.

The sensing cable detects as little as a few drops of the liquid and can be used to detect condensation. The WLD detection cables can be in lengths of 2+2m, 2+10m or 2+50m, after flooding the cable can be dried and reused.

Basic Features

If you wish to find out more product information or pricing please call 0044 (0) 1189 769 000 or email sales@sensormetrix.co.uk

View the HWg-WLD Water Leak Detector

Sequoia would like to announce the SE867-AGPS module

Date: 18 Jun 2010

SE867-AGPS is an assisted GPS module designed for the M2M market, offering extremely fast TTFF, low cost and short integration time.

Why Assisted GPS:

Assisted GPS, also known as A-GPS or AGPS, enhances the performance of standard GPS in devices connected to the cellular network. A-GPS improves the location performance of mobile devices in two ways:

-By helping obtain a faster "time to first fix" (TTFF). A-GPS acquires and stores information about the location of satellites via the cellular network so the information does not need to be downloaded via satellite.

-By helping position a mobile device when GPS signals are weak or not available. GPS satellite signals may be impeded by tall buildings, and do not penetrate building interiors well. A-GPS uses proximity to cellular towers to calculate position when GPS signals are not available.

The SE867-GPS includes an internal processor and an 8Mb flash memory with 44 channel operation and less than 35 sec time to first fix (TTFF) making the SE867-GPS module one of the leading receivers in the market place.

Designing in the SE867-GPS is very straight forward, a BGA device that has been designed so that the module can be easily placed even in a simple 2 layer PCB and the integration with our extensive range GPRS devices is very straight forward and simple.

The SE867-GPS is the perfect product for a varied range of M2M applications such as vehicle tracking, asset tracking, data collection or really any project where having access to positional data and status information of a physical asset is a key benefit or mandatory requirement

Sequoia’s technical team can help with all aspects of a design based on the SE867-GPS, reference schematics are available together with a development kit.

For further information please contact Tim Clayton at Sequoia Technology on 01189 769031 or tim.clayton@sequoia.co.uk

View the SE867-AGPS module

3D video support added to the Quantum Data 780

Date: 4 Jun 2010

Sequoia Technology today announced support for HDMI 1.4a 3D testing on the 780 Handheld Test Instrument for HDMI. The 780 is a battery powered, portable multimedia A/V signal generator and analyzer that can quickly check the HDMI digital ports on HDMI devices such as HDTVs, projectors, repeaters, A/V receivers, players, set-top-boxes, etc.

The 780 instrument's 3D capabilities include features for testing both source devices and sink devices equipped with 3D. In the initial release, two 3D format structures are supported-Side-by-Side half and Top-and-Bottom-additional 3D formats will be available in the near future. Users can select any of the HDMI 1.3 3D resolutions (timings) through the 780's touch screen display.

For testing HDMI sink devices, the 780 can render a variety of standard 2D patterns and can now render 3D bitmap patterns as well. Users can create their own 3D bitmaps from existing stereoscopic image pairs using Quantum Data's free 3D Bitmap Conversion Tool. When 3D video is transmitted from the 780, it also transmits the necessary 3D infoframe metadata in the HDMI Vendor Specific Infoframe. In this way, an HDTV's response to 3D metadata can be verified.

For testing HDMI 3D-capable source devices, the 780 parses the incoming 3D video and displays the left and right eye images on the 780's built-in display. With the 780's Network Analyzer option, the 3D infoframe metadata and timing data, transmitted from the source device, can be examined as well.

Additional 3D-related enhancements are planned. More 3D format structures will be supported as well as the parsing and display of 3D related EDID data from a 3D-equipped HDMI sink. Also planned is support for emulating the EDID of a 3D-equipped sink.

The 780 combines versatility, portability with ease of use and at an attractive price. Whether in the development lab or out in the field, the 780 is an ideal tool for investigating interoperability problems or conducting routine testing of sources and sinks. Existing 780 owners can download the 3D update for free.

Sequoia has a demonstration unit that can be shown to anyone interested in this product.

Go to Products...

Remote Monitoring EM01b Websensor re-engineered by Sequoia Technology for robustness and low cost

Date: 2 Jun 2010

Following on from the success and popularity of the EM01b used in server rooms and in IT circles generally, for monitoring temperature , humidity and light levels over the internet, Sequoia has re-engineered the EM01b to be more robust and now selling at a much lower cost of £250. Sequoia is also about to re-introduce the ES01 display unit to be used on the ES bus of the EM01b. The ES01 has also been re-engineered to be smaller and much lower cost. This unit continuously displays the temperature, humidity and light levels that the EM01b is sensing and comes with a 3m cable. The ES01 is powered from the EM01b. We expect to be bundling the EM01b and ES01 very shortly with a considerable saving in cost.

The EM01b websensor comes alive when used with Nagios where alarm situations can be set up for email or SMS email messages to be sent automatically. The EM01b is a really useful remote monitoring tool and in use in many countries to date. This new generation should appeal to even more situations with its new low price and new accessories.

EM01b Websensor

Telegesis ZigBee module with integrated ARM Cortex M-3 is a first

Date: 18 May 2010

The ETRX3 series is the 3rd generation of advanced ZigBee modules from Telegesis and the first module family on the market to feature the EM357 - the latest ARM Cortex M-3 SOC from Ember.

ETRX3 Module
This low power, high performance module with efficient memory utilisation makes it possible for users to add wireless ZigBee to their existing products without the need for specialist RF design skills.
A link budget of 105dB on the standard ETRX3 module gives excellent working range performance and combined with 192K Flash, 12K RAM and many advanced peripherals allows the straightforward integration of user applications on board the module.
If you are looking for ZigBee modules with better RF performance, then the ETRX3-LR with an extra LNA boosts the power to 123dB.
ETRX3 series modules are AT command driven and have a footprint of just 19x25mm for both standard and LNA driven variations. They are available with on board antenna or Hirose U.FL connector for use with an external antenna.

Development Kit
The ETRX3-DVK development kit is an ideal starting point for development and evaluation of the ETRX357 2.4GHz ZigBee modules.
Offering the highest wireless networking performance and application code space at low power consumption and with the modules unique AT-style command line interface, the ETRX3-DVK allows designers to quickly integrate ZigBee technology without complex software engineering effort.
The kit contains 3 USB development boards and 2 of each ETRX357 variants on carrier boards along with all other ancillary components required to get the kit up and running once connected to a PC.

IFSEC 2010

Date: 6 May 2010

We are delighted to announce that we will be exhibiting at this year’s IFSEC show on stand G612, Hall 4, to be held at the NEC, Birmingham from 10th – 13th May 2010. On show will be our extensive Wireless and IP Remote Monitoring solutions, including many wireless M2M modules and systems operating on GSM/GPRS, 3G, ZigBee and WiFi networks. Also on display will be GPS, Bluetooth, ISM band and IP enabled monitoring devices.

Additionally we will be focusing on our new and highly successful products, SMS Printer and M2M modems.

IP enabled products will include our IP environmental monitors and the launch of the HWg-Juno, an open IP video system, featuring universal I/O protocols.

Demonstrations will be running throughout the day and our technical staff will be at hand to help you with solutions for your products.

DDC Monitoring option for 780 Handheld Test Instrument for HDMI now available

Date: 26 Apr 2010

Sequoia Technology, today announced the release of an Auxiliary Channel Analyzer (ACA) feature on the 780 Handheld Test Instrument for HDMI. The 780 is a battery powered, portable multimedia A/V signal generator and analyzer that can quickly check the HDMI digital ports on HDMI 1.3 devices such as HDTVs, projectors, repeaters, A/V receivers, players, set-top-boxes, etc.

The 780 instrument's optional Auxiliary Channel Analyzer (ACA) feature is available in two configurations: 1) for monitoring DDC channel(s) and hot plug detect while emulating an HDMI source or sink device (available now); 2) for passive monitoring ("sniffing") DDC channel(s), hot plug detect lines, and CEC buses (available soon). The ability to passively monitor two separate sets of auxiliary data is especially useful for analyzing interoperability problems in an HDMI system comprised of three devices (source, repeater and sink).

The ACA feature enables installers, lab technicians and engineers to monitor DDC transactions such as HDCP and EDID as well as hot plug related events while emulating device(s) in the HDMI system. Since the 780 can emulate a known-good source and/or a known-good sink, operators can sequentially substitute for each device in the system to isolate an interoperability problem. The 780 can even monitor on both sides of a repeater device while emulating both the source and sink devices for trouble isolation.

With the 780 ACA passive monitoring capabilities, users can connect to an HDMI system to passively monitor each side of a repeater device such as an A/V receiver. The 780's ACA feature offers the additional flexibility to monitor passively on one side of an HDMI system while emulating an HDMI device and monitoring its transactions on the other side. For example, the 780 can emulate a set top box (STB) connected to the input side of an A/V receiver and monitor on the output side of the A/V receiver between it and the HDTV. Alternatively, troubleshooting personnel can emulate the HDTV connected to the output side of an A/V receiver while passively monitoring the upstream side between the STB and the input of the A/V receiver. In each case, the two sides of the HDMI-HDCP system transactions--upstream and downstream--are shown interleaved on the 780 GUI to provide an integrated view.

The ability to substitute for each device in an HDMI system, one by one, while emulating a known-good device and monitoring all transactions--upstream and downstream--is critical for troubleshooting HDMI interoperability problems especially when you can passively monitor one side of the HDMI system and emulate the other side.

The DDC transactions, CEC messages and hot plug events are decoded and presented sequentially on the 780's colour display. Operators can highlight a transaction and view its details in human readable text. Users can save a trace file and export it to a PC for dissemination to colleagues and subject matter experts for further analysis on the standalone ACA application available free from the Quantum Data website.

The 780 combines versatility, portability with ease of use and at an attractive price. Whether in the development lab or out in the field, the 780 is an ideal tool for investigating interoperability problems or conducting routine testing of sources and sinks. Existing customers can get their 780 upgraded - contact Sequoia Technology Ltd for ordering, upgrading and pricing information.

Sequoia has a demonstration unit that can be shown to anyone interested in this product.

Go to Products...

IP WatchDog HWg-WR02a: Ping Restarter

Date: 13 Apr 2010

IP WatchDog WR02a monitors whether a controlled device, or an Internet connection, is "alive". If the correct reply is not received in time, the controlled device is restarted using a relay, or a back-up connection is activated.

HW group extends the portfolio of IP WatchDog products and introduces an industrial version of IP WatchDog HWg-WR02a - "ping restarter". This term describes a product designed for monitoring the functionality of another device over IP (PING/WEB) or serial line (RS-232).

IP WatchDog can monitor two devices (two independent channels, two 110/230VAC relays). Industrial applications can benefit from DIN rail mount.

Failures are detected with five distinct methods, separately for each channel (Ping Tx/Rx, Web page request/push, RS-232 data).

IP Watchdog system diagram

Go to Products...

HWg-STE PoE: SNMP thermometer

Date: 19 Mar 2010

HWg-STE PoE is a web-enabled temperature (humidity) sensor with Power over Ethernet capability (PoE IEEE 802.3af) that simplifies installation. Measured temperature and humidity values are available over SNMP or through central Windows software (available free of charge).

HW group presents a new web thermometer, the HWg-STE PoE. The device features a built-in web server and SNMP support. The web thermometer can be powered over the Ethernet (PoE), or using the supplied power adaptor. The device comes with the HWg-PDMS software for displaying graphs and exporting data to MS Excel.

HWg-STE PoE is a cost-effective solution for the following applications:

Full details and an on line demo can be seen on our web site here.

Go to Products...

Market Leading Audio A/D Converter

Date: 24 Feb 2010

Sequoia Technology and Arda Technologies have announced an agreement to provide the best quality Audio A/D Converter in UK, Ireland and Nordic countries.

With unique features such as sampling rates up to 384kHz, direct access to multibit modulator outputs, DSD outputs, and low latency filters fine tuned for the most acoustically transparent performance, the AT1201 redefines high-end audio A/D conversion.

Go to Products...

Extend DVI & HDMI cables with Fiber Optics

Date: 24 Feb 2010

Sequoia Technology the leading technology company is proud to announce an agreement with Opticis to supply and support a range of Fiber Optics Extenders, KVM Switchers, Distributors and Matrix Networks covering DVI, HDMI, 3GSDI, USB, firewire and Displayport technologies. See here for more details.

Go to Products...

Sequoia sign distribution agreement with Telegesis

Date: 11 Feb 2010

Reading, United Kingdom 11th February 2010

Technology Solutions Specialist, Sequoia today announced that they have signed a distribution agreement with ZigBee module manufacturer Telegesis.

ZigBee modules operate on the globally accepted 2.4GHz ISM band frequency and provide a short range networking capability of up to 600 nodes.

David Taylor, Product Manager comments "Sequoia are delighted with the addition of Telegesis into our Wireless Products line up. This bolsters our ZigBee devices for customers looking to sell wireless networking products globally. We anticipate considerable growth in this sector with many applications being driven by requirements for Smart Energy and Home Health Care and Telegesis have a proven reputation for extremely robust ZigBee modules."

Telegesis manufacture a full range of OEM ZigBee modules. The modules comprise a World leading ZigBee Chip from Ember Corp, antenna and a highly functional, AT command layer. Telegesis modules allow designers to easily add ZigBee functionality. Telegesis and Sequoia provide everything needed for a successful ZigBee design

Sequoia announces Wireless Technology Seminar - 4th March 2010

Date: 10 Jan 2010

Wireless Technology Seminar

Sequoia Technology - the technology solutions company with over 20 years expertise in bringing highly technical products to market are holding a Wireless Technology Seminar to be held at the Sequoia offices in Reading - on Thursday 4th March 2010.

The event is free of charge to attend and confirmed speakers include, Jennic - representing 802.15.4 technology, Telit - representing GPRS and 3G technology and Wireless Logic - representing the Cellular Networks. They will be on hand, alongside members of the Sequoia team to discuss your application and answer any questions throughout the day.

The aim is to share knowledge about the capabilities and future roadmaps on various wireless technologies and to identify markets and opportunities on which to focus future technical works. The seminar is pitched at engineers and technical management of organisations who have a requirement for wireless technology in their products.

Delegates can attend morning and afternoon sessions and we encourage both, as this would be beneficial to learn more on this fast moving subject area. A light lunch is provided for all day delegates.

This is a technical event with many hands on demonstrations running throughout the day. Engineers are encouraged to bring their laptops as application downloads will be available.

Evaluation and Development Kits will also be on sale at much reduced rates to delegates paying or placing orders on the day.

The seminar is limited to 25 delegates so early booking is advisable. If you would like to reserve your place, please visit here

HW group: Poseidon 4002 Rack mount environment monitoring

Date: 16 Dec 2009

The Poseidon 4002 is a 19" 1U rack mount system for datacenter temperature and environment monitoring. The Poseidon presents the solution for monitoring of the racks and computer rooms (temperature, humidity, electricity supply, access to the room, detectors). The device alerts by e-mail, SNMP traps, SMS, output relays.

The Poseidon 4002 is a complete system for environment monitoring in a 19" rack, an entire server room or in a datacenter. The 4002 model can be mounted as a 1U device, or outside of the 42U space. 18 sensors are supported (temperature, humidity, smoke, flood, electricity supply status or failure, entry to the room, digital inputs). The device is SNMP compatible. Two monitoring applications (PD Trigger and HWg-PDMS) are included free of charge.

Applications:

Poseidon 4002

Sequoia launches FOX-LT for Low Cost Tracking

Date: 21 Aug 2009

FOX-LT is the latest tracking solution available from Sequoia Technology. With its powerful configuration features, as well as battery, CAN Bus, expanadable memory and Audio features, the FOX-LT is ideal for all your asset tracking requirements.

Go to Products...

Jennic : ZigBee PRO Evaluation Kit JN5148-EK010

Date: 31 Jul 2009

Release Date August 2009. Order Now To Reserve Your Kit

Go to Products...

HW group : TG-11 Temperature Logger With GSM Alert

Date: 29 Jul 2009

GSM thermometer with temperature logging and alerting over SMS and e-mail (GPRS). In addition, Tg11 works as a temperature logger - it stores temperature values in its internal Flash memory (every 15 minutes) and e-mails stored data (every 4 hours) over GPRS.

Go to Products...

HW group : STE Low Cost Thermometer/Hygrometer

Date: 24 Jul 2009

HW group and Sequoia Technology have announced the HWg STE, the low cost IP network thermometer with a built-in web interface. HWg STE sends e-mail alerts if the temperature exceeds a specified limit. Using SNMP, the HWg-STE can be connected to a NMS (Network Management System). HWg STE represents effective and economic solutions in following applications:

Go to Products...

Telit : GE865 - Smallest GSM/GPRS module on the market

Date: 20 Jul 2009

Telit Wireless Solutions have released the smallest GSM/GPRS module on the market.

The low profile and small size of the unique BGA package for the GE865-QUAD enable the design of extremely compact applications. Since connectors are eliminated, the solution cost is significantly reduced compared to conventional mounting.

With its ultra-compact design and extended temperature range, the Telit GE865 product line is the perfect platform for high-volume m2m applications and mobile data devices. Additional features such as integrated TCP/IP protocol stack and serial multiplexer extend functionality of the application at no additional cost.

Please contact Tim Clayton for further details. tim.clayton@sequoia.co.uk

Go to Products...

Partnership announcement with HW group

Date: 3 Jun 2009

Sequoia Technology and HW group have announced a partnership agreement to promote and market HW group product familiy.

HW group is a leading developer and manufacturer of IP related products, specialiasing in the following segments:

The products and support from HW group is of the highest order, enabling Sequoia Technology to supply the best solutions to suit our customers.

For more information on HW group products Click Here.

HW group : Poseidon 3468

Date: 2 Jun 2009

Sequoia and HW group announce the Poseidon 3468. The latest product from the family of IP monitoring systems.

The Poseidon 3468 is an IP thermostat with 2 relay outputs, 4 dry contact inputs, and support for 4 sensors, with a built-in web server, output control and alarm alerts (e-mail and SNMP trap).

Two relay outputs rated up to 110/230V can be controlled manually over a web interface.

Go to Products...

Siretta develop 2.4GHz mini PCB antenna

Date: 22 May 2009

Reading, UK 22nd May 2009: Sequoia Technology, the technology solutions provider offering electronic components, modular systems and complete solutions today announce the release of the next generation 2.4GHz mini PCB antenna from Siretta Antennas.

The PCB antenna is based on an efficiently tuned PCB element that is matched to work across the 2.4-2.5GHz frequency range. It is optimised for use on Zigbee, WLAN and Bluetooth networks.

Fitted with 100mm cable and an Ipex UFL connector it allows a quick design in and a longer working range when compared to a standard on board chip antenna offered on many of today's 2.4GHz ISM band modules.

Go to Products...

Jennic launch 3rd generation Zigbee PRO Wireless Microcontroller and Module

Date: 20 May 2009

Reading, UK 20th May 2009: Sequoia Technology, the technology solutions provider specialising in wireless communications announces a new platform of IEEE802.15.4 and Zigbee PRO single chip MicroController and Modular products based on the new Jennic JN5148 32 bit RISC processor.

The combination of the lowest operating current consumption and highest memory density of any single chip wireless microcontroller, plus an innovative Time of Flight ranging engine, will enable the development of next generation wireless mesh networks for battery powered and data rich applications.

The JN5148 32 bit wireless microcontroller achieves a system operation current consumption of 18mA when receiving and 15mA in transmit at +3dBm, which is typically 35% lower than current solutions. With 128kB ROM and 128kB RAM and advanced coding efficiency giving better code compression, the JN5148 has sufficient space for developers to integrate their embedded application softare and the ZigBee PRO protocol stack into a single chip. It can also be used as a co-processor, enabling ZigBee PRO to be added easily and quickly to existing systems.

Programmable CPU clock speeds from 4 to 32MHz and the use of five seperate power domains provides the ability to select low power or high performance up to 32 MIPS CPU operation enabling the JN5148 to be used across the full range of applications - from low power battery backed networks to high I/O, processor intensive systems. A unique patent pending Time of Flight ranging engine integrated into the device revolutionises location based services for sensor networks by providing improved accuracy over conventional signal strength based systems with little incremental cost.

The first version of the JN5148 is offered with Jennic's Zigbee PRO stack and is supported by a comprehensive range of evaluation and development kits as well as reference designs, code examples and an online developer forum. In addition to the the standalone wireless controller, the JN5148 is available in a fully integrated uFL module optimised for standard power, or a +20dBm high power, providing a rapid and easy to implement route to product introduction.

David Taylor, Sequoia Product Manager for Jennic explains; "Jennic products are designed to provide a fast route to high performance wireless network development by combining field proven stacks with innovative silicon features. A responsive support environment enables developers with little or no experience of mesh networks the ability to realise their ambitious designs quickly and easily.

Partnership announced with GP Batteries

Date: 29 Apr 2009

29th April 2009, Reading, United Kingdom

Sequoia Technology Ltd, the design led technology solutions company, today formalised a partnership with GP Batteries of Hong Kong, widely regarded as one of the leading primary and secondary battery suppliers in the world.

GP batteries, part of the Gold Peak Industries Group with annual revenues in excess of US $1 billion are the Number 1 consumer battery manfuacturer in Asia and employs over 12,000 people globally. They have a broad line up of rechargeable batteries and seek further expansion in Europe via a competent OEM design route.

Sequoia Technology, is a leading supplier of technology into wireless communications applications and it was the pedigree of Sequoia in this field that led to GP Batteries making its move. The partnership covers design and supply of the full range or products and design of customised battery solutions for our wireless customers.

David Taylor, Product Manager of Sequoia adds; "The agreement between GP Batteries and Sequoia makes a lot of sense in customising our product offerings particularly to customers invovled in designing Wireless M2M products. Getting an effective power source is critical to our customers success in the market. With the addition of GP Batteries to our range, it enhances our reputation of offering best of breed, technological solutions to our customer base".

Telit drop in replacement for Cinterion TC35i, MC35i, MC39 and MC39i

Date: 28 Apr 2009

Telit Wireless modules have created a module that is mechanically compatible and form factor compatible to the Cinterion/Siemens TC35i/MC35/MC39/MC39i, perfect to avoid the impending last time buy instruction from Cinterion.

GC864-C9 is available for purchase and full data is available now.

Please contact Tim Clayton on 01189 769031 or email tim.clayton@sequoia.co.uk for further information.

Go to Products...

3G to WiFi Router

Date: 25 Mar 2009

3G to WiFi Router provides wiFi or Ethernet connectivity to many wired and wireless clients using 3G cellular data network. See Wireless/3G WiFi Router.

Go to Products...

Sequoia adds unique SMS printer..

Date: 1 Feb 2009

The SMS printer, designed by Sequoia, is a unique and standalone small printer with a GPRS modem integrated. It receives SMS text messages and prints them on thermal paper. The unit can powered from 230VAC mains or 12v car battery making it truly portable and available for all situations. Great for fast food kitchens, taxis and delivery vehicles to receive precise instructions or requests on the move.

Go to Products...

Sequoia adds Leadtek GPS modules.

Date: 18 Dec 2008

Sequoia has signed an agreement with Leadtek to add its range of GPS modules to the already well known current line-up. This gives Sequoia one of the most comprehensive ranges of Sirf based GPS modules of any supplier. From virtually the smallest module upwards we can now find a module to suit your requirement with the firmware to go with it and the expertise to get it running on your board. We are happy to demo any of our products and show you the superior performance of our entire range

ZiiLABS (Formerly 3dLabs) & Sequoia in UK and Europe

Date: 18 Dec 2008

Sequoia has signed up ZiiLabs as a design partner for the UK and Europe. Seen here are Ged Ruffle - Sales VP for ZiiLabs and Mike Powell - Technology Director of Serquoia. Following on from the significant video and HDTV portfolio and expertise Sequoia has, ZiiLabs media processors were a natural extension to the range. ZiiLabs Semiconductor is a pioneering fabless semiconductor supplier of fully programmable media processors that deliver a rich mix of video, imaging, 2D/3D graphics, audio and floating-point capabilities. Based on an array of floating-point processing elements and dual ARM® cores the architecture has the performance, flexibility and low power consumption required to target a broad range of devices; portable media players, navigation systems, automotive infotainment, video conference and surveillance, mobile handsets and embedded systems.

Ged Ruffle & Mike Powell

Low Power Mini-ITX Motherboards

Date: 3 Dec 2008

Our new range of Mini-ITX motherboards is now available with ATX or DC input, Digital I/O and optional LVDS interface.

Go to Products...

3G Modules Now Available Online

Date: 5 Aug 2008

The Telit 3G UC864-E Module is now available to buy online as part of a development kit

Go to Products...

Axsem Products

Date: 18 May 2008

A new ISM band chipsets

Go to Products...

Or email us: sales(at)sequoia.co.uk
Currently Not Logged in