|Part Number||Weight||Pack Qty||Code||Price (Ex VAT)||Stock
|ARES14 BASIC KIT
Ares14 GSM with sensor with Mounting Plate Antenna PSU USB Cable
Sensor software for up to 8 sensors
20 SENSOR LICENCE FOR PDMS
Advanced Monitoring Software for HWg products - 250 licences
|HUMIDITY 1 WIRE 1m
Digital Humidity Sensor with 1 Wire Bus. Cable length 1m
|HUMIDITY 1 WIRE 3m
Digital Humidity Sensor with 1 Wire Bus. Cable length 3m
|HUMIDITY 1WIRE 10m
Digital Humidity sensor with 1 Wire Bus. Cable length 10m
1 Wire Temperature sensor with 1m cable and RJ11/12 connector. Temperature range -10 to +80 °C
1 Wire Temperature sensor with 3m cable and RJ11/12 connector. Temperature range -10 to +80 °C
1 Wire Temperature sensor with 5m cable and RJ11/12 connector. Temperature range -10 to +80 °C
Place your order before 2pm to select next day delivery. In a hurry? pre 10:30am delivery also available.
Powerful GSM Based Environmental Monitor
Ares14 is a remote environment monitoring solution that can be used at any place with GSM/Mobile Phone coverage.
Ares14 GSM Monitoring system collects and records data from connected sensors. Stored values can be sent to any system. Values outside of a specified range trigger an e-mail (over GPRS) or a text message (SMS) to multiple recipients.Ares14 also Contains a battery for several hours of backup. Alerts to power failures by email or SMS (up to 5 phone numbers).
Ares14 differs from Ares12 in the number of supported 1-Wire UNI sensors. Both versions include two digital (dry contact) inputs and support temperature, humidity, illumination, voltage and other 1-Wire UNI sensors. The Ares-14 is designed for larger systems and can support up to fourteen 1-wire UNI sensors as opposed to the Ares-12's three.
Measured data can be natively imported into HWg-PDMS, a Windows application. Data can be sent directly to a server, or attached to a periodic e-mail report.
This product comes with all the accessories you need except for a SIM card. Any SIM card can be used, as long as it is 2G and data enabled (check with the network) and does not have a pin protection. Please avoid Network 3, as they only seem to provide 3G only SIM cards.
All required software is provided. All you need to do is power up this unit, connect the antenna, sensor(s) and insert the SIM card. Once you have network connection (see instruction manual), you can set up your sensor safe ranges, email addresses, and Phone numbers for text and phone call and you are ready to go.
Ares 14 has an integrated rechargeable battery. Although this unit should be permanently connected to a regular supply, its internal battery performs two functions:
Data can be read into HWg-PDMS (free software), connected to a Web portal or to a SCADA/NMS system.
|GSM/GPRS:||Quad-Band 850/900 / 1800/1900 MHz - SMA antenna connector|
|Configuration:||Over USB, configuration utility on a “Mass storage” drive, no need to install|
|FW upgrade:||Over USB, or FOTA (Firmware Over The Air) over GPRS|
|Power:||9–30 VDC / 0.5 A external power|
|Internal battery:||Powers the device + sensors for 3–8 hours (depending on sensors)|
|Battery life:||5 to 12 years (depending on type, usage, and operating temperatures)|
|Flash log:||2 Mb / 170.000 records (e.g. 3 sensors @ 5 mins = 200 days)|
|Inputs:||2 digital inputs (for dry contact status detectors)|
|Sensors:||Supports 14x 1-Wire UNI sensors|
|Diagnostics:||External power detection, battery status [%]|
|Alarms:||Email, HWg-Push, SMS|
|SMS + ring upon alert:||Supported|
|Protocols:||SMTP, NTP, HWg Push (http)|
|Authentication:||STARTTLS (Google SMTP)|
|SMS communication:||Basic control with status information|
|Mechanical:||76 x 93 x 28 mm, wall-mountable, fits on a DIN rail|