We currently don't have any AMP-10 parts to order online. Please call +44(0)118 9769000 for further assistance
Place your order before 2pm to select next day delivery. In a hurry? pre 10:30am delivery also available.
For use with HFM-6 and HFM-7 series of Heat Flux sensors - 5 gain settings
The rest of the specification of the AMP10 is the same as the AMP-6 and AMP-12.
The AMP-10 Signal Conditioning Amplifier is designed for use with the HFM series. Heat Flux signals of the transducer are amplified by a low noise, wide-band differential amplifier whose gain may be set at one of five discrete values between 1 and 5000. The Resistance Temperature Sensor (RTS) is driven by a constant current of 100 mA. The resulting voltage is amplified by a low noise differential amplifier whose gain may be set at one of four discrete values between 1 and 500.
All signal connections are at the rear panel of the amplifier. A four-pin female Lemo connector is provided for leads from the Heat Flux Microsensor. Male connectors are provided for amplified heat flux and temperature output signals. The amplifier has a power switch on the front panel. Gains for heat flux and temperature signals are selected by multiple position switches. Ten-turn potentiometers are provided for screwdriver adjustment of the heat flux amplifier offset and setting of the temperature reference point. A battery test switch, state of charge, and charging indicator allow checking of the battery state and monitoring of the recharge process.
|Heat Flux Channels||Temperature (RTS) Channel|
|Gain Settings||1, 100, 500, 1000, 5000||1, 100, 200, 500|
|Gain Accuracy (%)|
|Gain = 1||+/-0.6%||+/-0.6%|
|Gain = 100||+/-1.5%||+/-1.5%|
|Gain = 200, 500||+/-1.5%||+/-1.5%|
|Gain = 1000||+/-2.1%|
|Gain = 5000||+/-3.6%|
|Gain = 1||1 MHz||1 MHz|
|Gain = 100||150 kHz||150 kHz|
|Gain = 200||100 kHz|
|Gain = 500||50 kHz||50 kHz?|
|Gain = 1000||25 kHz|
|Gain = 5000||5 kHz|
|Input Impedance||1000 MOhms||1000 MOhms|
|Input Noise||0.2 uV||0.2 uV|
|Full Scale Output||6 Volts||6 Volts|